The Ride Engine Nug Link Combo Pack has been designed to take the load off your arms when winging, giving you a seamless connection from your wing, to you, to your board - The ultimate drag free, hands free approach.

The Nug: 

Certain things just suck: parking tickets, paper cuts, mealy apples and wrestling to get in and out of a cold, damp wetsuit. We can’t help you with the first three but dealing with the cold, damp wetsuit problem is solved thanks to our Technical Changing Robe.

The oversized design and zippered arm holes of the Technical Changing Robe make taking off or putting on even the thickest wetsuit a casual affair. The synthetic lambs wool lining, drawstring hood, and front hand pockets will keep you warm and toasty—wetsuit off or on. The Technical Changing Robe’s zippered, windproof and water-resistant ripstop shell will protect against all but the gnarliest of conditions and leave you toaster-warm on the beach while every-one else shivers.

• Oversize cut for easy changing
• Windproof and water-resistant ripstop shell
• Synthetic lambs wool lining
• Front hand-warmer pockets
• Zippered side-arm holes for “no rise” changing
• Drawstring hood
• Two-way heavy-duty zipper.

For those long days on the water, Vapor Rash Guard Long Sleeve will level up the defense against board wax irritation, harness rash, and, thanks to its UPF 50+ protection, sun burn. The four-way Spandex/nylon material of the Vapor Rash Guard Long Sleeve ensures it keeps it shape and fit throughout countless sessions and the flatlock stitching keeps things smooth and friendly on your skin.

• Classic performance-fit long-sleeve rash guard
• Four-way stretch Spandex/nylon blend material that retains shape and fit
• UPF 50+ sun protection
• Elastic loop board short connection
• Flatlock stitching

With a classic rashie performance fit, the Vapor Rash Guard Short Sleeve is like a second skin for when protection from the elements, your harness or the wax on your board is needed. The Vapor Rash Guard Short Sleeve’s flatlock stitching makes things soft and gentle against your skin and its UPF 50+ sun protection keeps the all-too-powerful solar rays at bay.

• Classic performance-fit short-sleeve rash guard
• Four-way stretch Spandex/nylon blend material that retains shape and fit
• UPF 50+ sun protection
• Elastic loop board short connection
• Flatlock stitching

Certain things just suck: parking tickets, paper cuts, mealy apples and wrestling to get in and out of a cold, damp wetsuit. We can’t help you with the first three but dealing with the cold, damp wetsuit problem is solved thanks to our Technical Changing Robe.

The oversized design and zippered arm holes of the Technical Changing Robe make taking off or putting on even the thickest wetsuit a casual affair. The synthetic lambs wool lining, drawstring hood, and front hand pockets will keep you warm and toasty—wetsuit off or on. The Technical Changing Robe’s zippered, windproof and water-resistant ripstop shell will protect against all but the gnarliest of conditions and leave you toaster-warm on the beach while every-one else shivers.

• Oversize cut for easy changing
• Windproof and water-resistant ripstop shell
• Synthetic lambs wool lining
• Front hand-warmer pockets
• Zippered side-arm holes for “no rise” changing
• Drawstring hood
• Two-way heavy-duty zipper.

There when you need it—barely there when you don’t. At less than six ounces, the Inner Space Jacket is an ultra-lightweight, easily packable layer that is ready to be deployed in times of need. Utilising a space-age material with precision, laser-cut taped seams the Inner Space Jacket provides a waterproof and windproof barrier to keep you protected from that unexpected rain squall or chilly evening pack down. The Inner Space Jacket stows away into its own chest pocket, making it quick and easy to toss in a day pack, duffle or glove box.

Features:

• Athletic performance fit
• Space-age waterproof and windproof material
• Taped seams
• Ultra-lightweight, unobtrusive design
• Easy self-stow in chest pocket
• Low profile performance hood

Care Instructions:  Delicate wash cycle or hand wash, cold water. Hang dry or tumble dry low. Remove promptly. Do not dry clean.

The wind is up and the wing is ready. Are you? Using a harness while wing surfing is a sure-fire way to stay out longer. Our Wing Surf Harness Line makes for quick and easy hooking and unhooking. Fully adaptable to attached to boom wings, handles and pigtail connections.

Features

• TPU Line Cover
• Adjustable length internal rope
• Compatible with direct handle connection or pigtail connection

Coming in at .10kg (100 grams) per strap, the Ultra-Lite Foot Strap’s minimalist design offers a secure, no-frills connection for your kite surfboards, foil boards and tow boards.

Features:

• Soft, Lycra-lined neoprene
• Sonic reinforced, adjustment mounting holes
• Ergonomic shape
• Lightweight: 100 grams per strap
  
• Complete with 25mm self-tapping screws w/nylon washer
• Strap sold as a single unit

Ideal for when the least amount of drag or obstruction is needed, the RE-Recoil Waist Leash stays out of the way and drag-free for SUP downwind runs or distance paddling. The combination of position on the body and coiled construction is the go-to leash set-up for wing surfing, allowing the hands to be free to focus on grip rather than moving the leash away.

Features

• 7mm polyurethane cord
  
• Coiled cord construction
  
• Rotating connection to waist belt and rail saver
  
• Stainless steel swivels
  
• Easy-adjust waist belt with quick clip
  
• Suggested use: downwind and hydrofoil SUP, small-wave surfing, wing surfing

Security and connection while riding your board are things that you shouldn’t have to worry about. The RE-Recoil Leash has been thoughtfully designed to provide this piece of mind whether you use it on your SUP for surfing, downwind runs or open water paddling, a foil surf leash, or a direct connection for wings used for wing surfing. The leash’s coiled construction keeps it from getting tangled in your feet and its eight-foot extended length keeps your deck close enough to quickly retrieve yet far enough away not to be an impact hazard.

Features

• 7mm cord thickness
• Coiled cord construction
  
• Rotating ankle cuff and rail saver
  
• Stainless steel swivels
  
• Full neoprene, Lycra-covered ankle wrap
• Key pocket
• Suggested surf size use: 2-to-8 foot

Do you know anyone who enjoys swimming for their board after getting pinched in the barrel or stuffing the rail on a floater? Yeah, we don’t either. That’s why we made the RE-Comp Leash—to serve as a reliable and unobtrusive daily-use connection to you and your board.

Features

• 7mm cord thickness
• Rotating ankle cuff and rail saver
• Stainless steel swivels
• Polyurethane cord
• Full neoprene, Lycra-covered ankle wrap
• Key pocket
• Suggested surf size use: 2-to-8 foot

Do you know anyone who enjoys swimming for their board after getting pinched in the barrel or stuffing the rail on a floater? Yeah, we don’t either. That’s why we made the RE-Comp Leash—to serve as a reliable and unobtrusive daily-use connection to you and your board.

Features

• 7mm cord thickness
• Rotating ankle cuff and rail saver
• Stainless steel swivels
• Polyurethane cord
• Full neoprene, Lycra-covered ankle wrap
• Key pocket
• Suggested surf size use: 2-to-8 foot

When you need a longer, freestyle-length leash in order to swap the bar, spin the body, or unhook for freedom, the RE Freestyle Kite Leash has you securely covered.

Features

• Soft Lycra cover
  
• Neoprene snap-link cover
  
• Conforms to ISO standards
  
• Easy pull release

When you are more focused on racing down the next section of the wave, perfecting your 360 tack on a foil or just have no interest in unhooked maneuvers, you don’t need a long, freestyle leash dangling and bouncing around. The RE Short Kite Leash connects to the front of your harness and keeps everything tidy, neat and always in reach.

Features

• Soft Lycra cover
  
• Neoprene snap-link cover
  
• Conforms to ISO standards
  
• Easy pull release

Melting in the car, melting on the beach, slippery when cold, gooey when hot—sometimes wax can be a total pain. For those that don’t want to deal with the hassles of wax, the sure-footed grip provided by our RE-F Front Traction is the answer to all this (not to mention it also keeps you locked in for stomping airs and navigating those freight-train barrels). The low-profile, six-piece design lets you get that perfect placement on the board.

Features:

• Six-piece pad
• Wide-groove, micro-dot texture
• 3M high-grade adhesive

For classic tails, as well as blunt-nose or fish shapes that often incorporate a wider tail dimension, the RE-3 Rear Traction is highly adaptable and customisable. The RE-3 Rear Traction is a three-piece tail pad that features dual grip zone with micro-dot texture, a 25mm kick tail and 5mm arch bar that delivers unmatched board feel and control.

Features:

• Three-piece pad
• Dual grip zone with micro-dot texture
• 25mm beveled kick tail
• 5mm arch bar
• 3M high-grade adhesive

A two-piece pad featuring dual grip zones with micro dot texture, the RE-2 Rear Traction has the perfect dimensions for your classic surf-shape tail and provides a planted feel for driving around sections and blasting off the top. Made ultra-thin to retain board feel, the RE-2 Rear Traction has a 25mm beveled kick tail to keep the back foot locked in place.

Features:

• Two-piece foot pad
• Dual grip zone with micro-dot texture
• 25mm beveled kick tail
• 3M high-grade adhesive

Replacement rope for sliding rope spreader bar (all sizes). Use "Figure-8" knot when installing.